Disclaimer: Not affiliated with or endorsed by Nissan Motor Company. For informational purposes only. Full Disclaimer

2022 Nissan Frontier Owners Manual - VEHICLE INFORMATION DISPLAY



VEHICLE INFORMATION DISPLAY

The vehicle information display is located to the left of the speedometer. It displays such items as: • Vehicle settings • Trip computer information • Drive system warnings and settings (if so

equipped) • Cruise control system information • Blind Spot Warning (BSW) system (if so

equipped) • Rear Cross Traffic Alert (RCTA) system (if

so equipped)

• NISSAN Intelligent Key® operation information

• Indicators and warnings • Tire Pressure information

HOW TO USE THE VEHICLE INFORMATION DISPLAY The vehicle information display can be navigated using the ENTER and but- tons located on the steering wheel.

1. ENTER — press to select the vehicle information menu items. Additionally, use the UP/DOWN function to navigate the menu items

2. — move LEFT/RIGHT to navigate through the items in the vehicle infor- mation display

The ENTER button also controls audio func- tions. For additional information, refer to the separate NissanConnect® Owner’s Manual. STARTUP DISPLAY When the vehicle is placed in the ON or ACC (if so equipped) position, the vehicle information display may display the following screens: • Speed • Off Road (if so equipped) • Auxiliary Gauges (if so equipped) • Driving • Fuel Economy • Audio • Navigation (if so equipped) • Compass (if so equipped) • Driving Aids • Tire Pressures • Warning Confirmation • Settings Warning Confirmation will only display if there are any warnings present. For addi- tional information, see “Vehicle information display warnings and indicators” (P. 2-28). To control which items display in the ve- hicle information display, see “Settings” (P. 2-21).

SETTINGS The setting mode allows you to change the information displayed in the vehicle infor- mation display: • Driver Assistance • Meter Settings • Vehicle Settings • Alerts • Maintenance • Unit • Language • Factory Reset

LIC4099

Instruments and controls 2-21

Driver Assistance The driver assistance menu allows the user to change the various driving and parking aids. Some menu items shown below may not be equipped on your vehicle.

Menu item Explanation Lane Displays available lane options.

Warning (LDW) Allows user to turn the Lane Departure Warning (LDW) system on or off. For additional information, see “Lane Departure Warning (LDW)” (P. 5-27).

Blind Spot Displays available blind spot options. Warning (BSW) Allows user to turn the Blind Spot Warning (BSW) system on or off. For additional information, see “Blind Spot Warning (BSW)”

(P. 5-32). Emergency Brake Displays available emergency brake options.

Front Allows user to turn the front emergency braking system on or off. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection” (P. 5-83) and “Intelligent Forward Collision Warning (I-FCW)” (P. 5-94).

Rear Allows user to turn the rear emergency braking system on or off. For additional information, see “Rear Automatic Braking (RAB)” (P. 5-77).

Traffic Sign Allows use to turn the Speed Limit Sign recognition on or off. For additional information, see “Traffic Sign Recognition (TSR)” (P. 5-24).

Driver Attention Allows user to turn the Intelligent Driver Alertness system on or off. For additional information, see “Intelligent Driver Alertness (I-DA)” (P. 5-106).

Parking Aids Displays available parking aids. Moving Object Allows user to turn the Moving Object Detection (MOD) on or off. For additional information, see “Moving Object Detection

(MOD)” (P. 4-24). CTA Allows user to turn the Rear Cross Traffic Alert (RCTA) system on or off. For additional information, see “Rear Cross Traffic Alert

(RCTA)” (P. 5-43). Sensor Allows the user to turn the sensors on or off. Display Allows user to turn the display on or off in the vehicle information display. Volume Allows user to adjust the volume of warning chimes. Range Allows user to set a specific range for the sensors to engage.

2-22

Instruments and controls

Meter Settings The meter settings allow the user to change the settings for the vehicle information display. Some menu items shown below may not be equipped on your vehicle.

Menu item Explanation Main Menu Selection Allows user to customize the screens shown in the vehicle information display.

Speed Allows user to turn the speedometer screen on or off in the vehicle information display. Off Road Allows user to turn the off road and 4WD monitor on or off in the vehicle information display. For additional

information, see “Off-Road and 4–Wheel Drive (4WD) Monitor” (P. 2-9). Auxiliary Gauges Allows user to turn the auxiliary gauges on or off in the vehicle information display. For additional informa-

tion, see “Auxiliary gauges” (P. 2-8). Driving Allows user to turn the drive computer screen on or off in the vehicle information display. Fuel Economy Allows user to turn the fuel economy on or off in the vehicle information display. Audio Allows user to turn the audio screen on or off in the vehicle information display. For additional information,

refer to the separate NissanConnect® Owner’s Manual. Navigation Allows user to turn the navigation on or off in the vehicle information display. For additional information, refer

to the separate NissanConnect® Owner’s Manual. Speed Limit Sign Allows user to turn the speed limit sign screen on or off in the vehicle information display. Driving Aids Allows user to turn the driving aids on or off in the vehicle information display. Tire Pressures Allows user to turn the tire pressures screen on or off in the vehicle information display.

ECO Drive Report Allows user to access the ECO drive report. Display Allows user to turn the ECO drive report on or off. ECO Drive Report Allows user to view and reset ECO drive report history.

Welcome Effect Allows user to customize the available welcome effects. Dial Effect Allows user to turn the dial effect on or off. Display Effect Allows user to turn the display effect on or off.

Instruments and controls 2-23

Vehicle Settings The vehicle settings allow the user to change the settings for lights, wipers, locking, keys, and other vehicle settings. Some menu items shown below may not be equipped on your vehicle.

Menu item Explanation Rear Door Alert Displays the available rear Door Alert options.

Alert and Horn When selected, the alert is displayed and the horn sounds. Alert Only When selected, only the alert is displayed. Off When selected, no alert or horn will be active.

Lighting Displays available lighting features of the vehicle. Welcome Light Allows user to turn the welcome light on or off. Auto Room Lamp Allows user to turn the auto room lamp feature on or off. Light Sensitivity Allows user to change when the lights illuminate based on the brightness outside the vehicle. Light Off Delay Allows user to change the duration of time that the automatic headlights stay on after the vehicle is shut off.

Turn indicator Displays available turn indicator options. 3 Flash Pass Allows user to turn the 3 flash pass on or off.

Locking Displays available locking options. I-Key Door Lock Allows user to turn I-key door lock on or off. When turned on, the request switch on the door is activated. Selective Unlock Allows user to turn selective unlock on or off. When turned on, only the driver’s door is unlocked after the

door unlock operation. When the door handle request switch on the driver’s or front passenger’s side door is pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the door unlock operation is performed again within 1 minute. When this item is turned off, all the doors will be unlocked after the door unlock operation is performed once.

Answer Back. Horn Allows user to turn answer back horn on or off. Auto Unlock Displays available options for the auto door unlock.

Off Doors will have to be manually unlocked. IGN Off Doors will unlock when the ignition is placed in the OFF position. Shift P Doors will unlock when the vehicle is shifted into P (Park).

2-24

Instruments and controls

Menu item Explanation Wipers Displays available wiper options.

Speed Dependent Allows user to turn the speed dependent feature on or off. For additional information, see “Wiper and washer switch” (P. 2-37).

Headlamp On Displays available headlamp on options. Off Headlights do not activate automatically when the wipers are activated. Wiper Low & High Headlights activate when the wiper stalk is set to either low or high mode. Wiper INT, Low & High Headlights activate when the wiper stalk is set to intermittent, low, or high mode.

Alerts The alarm menu allows the user to set specific alarms for various items on the vehicle. Some menu items shown below may not be equipped on your vehicle.

Menu item Explanation Timer Alert Allows user to set the timer alert alarm. Navigation Allows user to turn the navigation alarm on or off. Phone Allows user to turn the phone alarm on or off. Mail Allows user to turn the mail alarm on or off.

Instruments and controls 2-25

Maintenance The maintenance menu allows the user to set reminders for various vehicle maintenance items. Some menu items shown below may not be equipped on your vehicle.

WARNING The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. For additional informa- tion, see “Changing wheels and tires” (P. 8-39). Many factors including tire inflation, alignment, driving habits and road conditions affect tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does not mean your tires will last that long. Use the tire replacement indicator as a guide only and always perform regular tire checks. Failure to perform regular tire checks, including tire pressure checks could result in tire failure. Serious vehicle damage could occur and may lead to a collision, which could result in serious personal injury or death.

Menu item Explanation Maintenance Allows user to cycle through various maintenance items and set reminders to perform maintenance at spe-

cific intervals. Oil and Filter Allows user to set an oil and filter reminder at a specific interval or reset the current one. Air Filter Allows user to set an air filter reminder at a specific interval or reset the current one. Tire Allows user to set a tire reminder at a specific interval or reset the current one. Brake Pad Allows user to set a brake pad reminder at a specific interval or reset the current one. Brake Fluid Allows user to set a brake fluid reminder at a specific interval or reset the current one. Battery Allows user to set a battery reminder at a specific interval or reset the current one. Transmission Fluid Allows user to set a transmission fluid reminder at a specific interval or reset the current one. Engine Coolant Allows user to set an engine coolant reminder at a specific interval or reset the current one. Spark Plug Allows user to set a spark plug reminder at a specific interval or reset the current one. Other Allows user to set a reminder, other than for the maintenance items listed above, at a specific interval or re-

set the current one.

2-26

Instruments and controls

Unit The unit menu allows the user to change the units shown in the vehicle information display.

Menu item Explanation Mileage Displays available mileage display units. Pressure Displays available pressure display units. Temperature Displays available temperature display units.

Language The language menu allows the user to change the languages displayed in the vehicle information display.

Menu item Explanation Language Displays available language options for the vehicle information display.

Factory Reset The factory reset menu allows the user to restore the vehicle information display settings to factory status.

Menu item Explanation Factory Reset Allows user to reset the vehicle information display settings to the original factory settings. Once selected,

the user can confirm or deny the reset.

Instruments and controls 2-27

VEHICLE INFORMATION DISPLAY WARNINGS AND INDICATORS The following messages may appear in your vehicle information display.

Key Battery Low This indicator appears when the Intelligent Key battery is running out of power. If this indicator appears, replace the bat- tery with a new one. For additional infor- mation, see “Battery replacement” (P. 8-23).

Key ID Incorrect This warning appears when the ignition switch is placed from the OFF position and the Intelligent Key is not recognized by the system. You cannot start the engine with an unregistered key. For additional information, see “NISSAN In- telligent Key®” (P. 3-2).

Key System Error: See Owner’s Manual

After the ignition switch is placed in the ON position, this warning appears for a period of time and then turns off. The Key System Error message warns of a malfunction with the Intelligent Key sys-

tem. If the warning appears while the en- gine is stopped, it may be impossible to start the engine. If the warning appears while the engine is running, you can drive the vehicle. However, in these cases, have the system checked. It is recommended that you visit a NISSAN dealer for this service.

No Key Detected This warning appears when the Intelligent Key is left outside the vehicle with the igni- tion switch in the ON position. Make sure the Intelligent Key is inside the vehicle. For additional information, see “NISSAN In- telligent Key®” (P. 3-2).

Battery Voltage Low Charge battery This warning appears when the battery is low and needs to be charged.

Brightness indicator This indicator appears when the vehicle information display screen brightness is being adjusted.

Door Open This warning appears when a door has been opened.

FRT & RR tire size difference: See Owner’s Manual This warning may appear if there is a large difference between the diameters of the front and rear wheels. Pull off the road in a safe area, with the engine idling. Check that all the tire sizes are the same, that the tire pressure is correct and that the tires are not excessively worn. For additional infor- mation, see “Wheels and tires” (P. 8-30).

Loose Fuel Cap This warning appears when the fuel-filler cap is not tightened correctly after the ve- hicle has been refueled. For additional in- formation, see “Fuel-filler door” (P. 3-21).

Headlight System Error: See Owner’s Manual This warning appears when the LED head- lights are not functioning properly. If this warning appears, have your system checked. It is recommended that you visit a NISSAN dealer for this service.

2-28

Instruments and controls

Low Fuel This warning appears when the fuel level in the fuel tank is getting low. Refuel as soon as it is convenient, preferably before the fuel gauge reaches 0 (Empty).

There will be a small reserve of fuel in the tank when the fuel gauge needle reaches 0 (Empty).

Low Tire Pressure Error — Info

This warning appears when the low tire pressure warning light in the meter illumi- nates and low tire pressure is detected. Press the ENTER button for information about the low tire pressure. For additional information, see “Low tire pressure warning light” (P. 2-16) and “Tire Pressure Monitoring System (TPMS)” (P. 5-5).

Low Washer Fluid This warning appears when the windshield- washer fluid is at a low level. Add windshield- washer fluid as necessary. For additional information, see “Windshield-washer fluid” (P. 8-13).

Maintenance indicators When engine oil service is due, one or more of these icons will appear automatically to remind you. For additional information, see “Engine oil” (P. 8-6). These will also appear when the user-set re- minders are met. For additional information, see “Vehicle information display” (P. 2-20).

Power turned off to save the battery This warning appears after the ignition switch is automatically turned off to save the battery.

Power will turn off to save the battery This message appears in the vehicle infor- mation display after a period of time if the ignition switch is in the ACC or the ON po- sition and if the vehicle is in P (Park). For additional information, see “Push-button ignition switch positions” (P. 5-14).

Push brake and start switch to drive

This indicator appears when the shift lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch with

the brake pedal depressed. You can start the engine from any position of the ignition switch.

Range XX miles This warning appears to indicate the ap- proximate distance remaining before the fuel reaches 0 (Empty).

Check Rear Seat For All Articles When the system is enabled, this message appears when the vehicle comes to a com- plete stop, the vehicle is transitioned from the D (Drive) position to P (Park) position, and the driver exits the vehicle. This mes- sage alerts the driver, after a period of time, to check for items in the rear seat after the audible alert has been provided.

NOTE: This system is disabled until a driver en- ables it using the vehicle information display. For additional information, see “How to use the vehicle information dis- play” (P. 2-21). For additional information, see “Rear Door Alert” (P. 2-53).

Instruments and controls 2-29

Rear Door Alert is activated When the system is enabled, this message appears when the Rear Door Alert system is active and can remind the driver to check the back seat. • Using the steering wheel switch, a driver

can select “Dismiss Message” to clear the display for a period of time. If no selection is made, this message automatically turns off after a period of time.

• Using the steering wheel switch, a driver can select “Disable Alert” to disable the horn alert for the remainder of the cur- rent trip.

WARNING Selecting “Dismiss Message” during a stop within a trip temporarily dis- misses the message for that stop with- out turning the system off. Alerts can be provided for other stops during the trip. Selecting “Disable Alert” turns off the Rear Door Alert system for the re- mainder of a trip and no audible alert will be provided.

NOTE: This system is disabled until a driver en- ables it using the vehicle information display. For additional information, “How to use the vehicle information display” (P. 2-21). For additional information, “Rear Door Alert” (P. 2-53).

Release Parking Brake This warning appears in the message area of the vehicle information display when the parking brake is set and the vehicle is driven. Press the brake pedal to release the parking brake.

Reminder: Turn OFF Headlights

This warning appears when the headlights are left in the ON position when exiting the vehicle. Place the headlight switch in the OFF or AUTO position. For additional infor- mation, see “Headlight and turn signal switch” (P. 2-38).

Remote Engine Start Mode This warning appears in the vehicle infor- mation display when the vehicle has been started using the remote start function. To start the vehicle, apply the brake and place the ignition switch in the ON position.

Shift to Park This warning appears when the ignition switch is in the ACC or OFF position and the shift lever is not in the P (Park) position. Also, a chime sounds when the ignition switch is in the ACC or OFF position. If this warning appears, move the shift lever to the P (Park) position and start the engine.

Shipping Mode On Push Storage Fuse This warning may appear if the extended storage switch is not pushed in. When this warning appears, push in the extended storage switch to turn off the warning. For additional information, see “Extended stor- age switch” (P. 2-60).

2-30

Instruments and controls

Tire Pressure Low - Add Air This warning appears when the low tire pressure warning light in the meter illumi- nates and low tire pressure is detected. The warning appears each time the ignition switch is placed in the ON position as long as the low tire pressure warning light re- mains illuminated. If this warning appears, stop the vehicle and adjust the tire pres- sures of all four tires to the recommended COLD tire pressure shown on the Tire and Loading Information label. For additional information, see “Low tire pressure warning light” (P. 2-16) and “Tire Pressure Monitoring System (TPMS)” (P. 5-5).

TPMS Error: See Owner’s Manual This warning appears when there is an er- ror with your TPMS. If this warning appears, have the system checked. It is recom- mended that you visit a NISSAN dealer for this service.

When parked apply parking brake

This message appears when a malfunc- tion occurs in the electric shift control sys- tem below 3 mph (5 km/h).

Have the system checked. It is recom- mended that you visit a NISSAN dealer for this service.

4WD High Temp: Stop vehicle

This warning appears when the 4-wheel drive system is not functioning properly while the engine is running.

4WD Error: See Owner’s Manual

This warning appears when the 4-wheel drive system is not functioning properly while the engine is running.

Tire Size Incorrect: See Owner’s Manual

This warning appears when the 4-wheel drive system is not functioning properly while the engine is running.

4WD shift indicators These indicators show which 4WD mode is selected. For additional information, see “Using 4–wheel drive (4WD)” (P. 5-111).

4WD MODE SHIFTING This message appears when the vehicle is shifting into 4WD. For additional information, see “Using 4–wheel drive (4WD)” (P. 5-111).

AT (Automatic Transmission) CHECK

If the service warning appears while the engine is running, or while driving, it may indicate that the AT is not functioning prop- erly and may need servicing. Have the sys- tem checked, and if necessary, repaired promptly. It is recommended that you visit a NISSAN dealer for this service.

AT (Automatic Transmission) Error: See Owner’s Manual If this message appears while the engine is running, or while driving, it may indicate that the AT is not functioning properly and may need servicing. Have the system checked, and if necessary, repaired promptly. It is recommended that you visit a NISSAN dealer for this service.

Instruments and controls 2-31

Service AT This transmission has a high fluid tem- perature protection mode. If the fluid tem- perature becomes too high (for example, climbing steep grades in high tempera- tures with heavy loads, such as when tow- ing a trailer), engine power and, under some conditions, vehicle speed will be de- creased automatically to reduce the chance of transmission damage. Vehicle speed can be controlled with the accelera- tor pedal, but the engine and vehicle speed may be reduced.

WARNING When the high fluid temperature pro- tection mode operation occurs, vehicle speed may be gradually reduced. The reduced speed may be lower than other traffic, which could increase the chance of a collision. Be especially careful when driving. If necessary, pull to the side of the road at a safe place and allow the transmission to return to normal operation; or have it repaired if necessary.

Blind Spot Warning (BSW)/ Rear Cross Traffic Alert (RCTA) indicator

This indicator appears when the BSW and RCTA systems are engaged. For additional information, see “Blind Spot Warning (BSW)” (P. 5-32) and “Rear Cross Traffic Alert (RCTA)” (P. 5-43).

Cruise control indicator This indicator shows the cruise control sys- tem status. For additional information, see “Cruise con- trol” (P. 5-51).

Currently unavailable This message may appear when the Intel- ligent Cruise Control (ICC) system is en- gaged. Under the following conditions, the ICC system is automatically cancelled: • When the VDC operates. • When a wheel slips. • When the VDC system is turned off. The above system cannot be used in some situations (VDC operates, wheel slips, and VDC system is off).

Driver Attention Alert — Malfunction

This warning appears when the Intelligent Driver Alertness (I-DA) system is not func- tioning properly. For additional information, see “Intelligent Driver Alertness (I-DA)” (P. 5-106).

Driver Attention Alert — Take a Break?

This alert appears when the system has detected that the driver may be displaying fatigue or a lack of attention.

Forward Driving Aids Temporarily Disabled Front Sensor Blocked See Owner’s Manual This message appears when the front ra- dar sensor may be obstructed due to: • mud, dirt, snow, ice, etc. • inclement weather (rain, fog, snow, etc.) All forward driving aids are temporarily dis- abled until the system detects that the front radar sensor is no longer obstructed. For additional information, see: • Automatic Emergency Braking (AEB) with

Pedestrian Detection (P. 5-83) • Intelligent Cruise Control (ICC) (P. 5-53)

2-32

Instruments and controls

• Intelligent Forward Collision Warning (I-FCW) (P. 5-94)

Intelligent Cruise Control (ICC) indicators

These indicators show the Intelligent Cruise Control (ICC) system status. The sta- tus is shown by color. For additional infor- mation, see “Intelligent Cruise Control (ICC)” (P. 5-53).

Automatic Emergency Braking (AEB) with Pedestrian Detection emergency warning indicator

This indicator appears along, with an au- dible warning, when the system detects the possibility of a forward collision. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection” (P. 5-83).

Lane Departure Warning (LDW) indicator

This indicator appears when the LDW sys- tem is engaged. For additional information, see “Lane De- parture Warning (LDW)” (P. 5-27).

Malfunction This warning appears when one or more of the following systems (if so equipped) is not functioning properly: • Blind Spot Warning (BSW) • Intelligent Cruise Control (ICC) • Lane Departure Warning (LDW) • Rear Cross Traffic Alert (RCTA) • Traffic Sign Recognition (TSR) If one or more of these warning appears, have the system checked. It is recom- mended that you visit a NISSAN dealer for this service.

Not Available High Camera Temp This message appears when the camera detects an interior temperature of more than approximately 104°F (40°C). For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection” (P. 5-83), “Lane Departure Warning (LDW)” (P. 5-27).

Parking Sensor This indicator appears when the sensor is activated. For additional information, see “Rear Sonar System (RSS)” (P. 5-127).

Parking Sensor Error: See Owner’s Manual

This warning appears when there is an er- ror with the system. For additional informa- tion, see “Rear Sonar System (RSS)” (P. 5-127).

Rear Automatic Braking (RAB) indicator

This indicator appears to indicate the sta- tus of the Rear Automatic Braking (RAB) system. For additional information, see “Rear Automatic Braking (RAB)” (P. 5-77).

System fault See Owner’s Manual This warning appears if there is a malfunc- tion in one of the following systems: • Automatic Emergency Braking (AEB) with

Pedestrian Detection • Intelligent Forward Collision Warning

(I-FCW) • Rear Automatic Braking (RAB) For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection” (P. 5-83), “Intelligent Forward Col- lision Warning (I-FCW)” (P. 5-94) and “Rear Automatic Braking (RAB)” (P. 5-77).

Instruments and controls 2-33

Speed Limit Sign indicator This message may appear when the Traffic Sign Recognition system is engaged. For additional information, see “Traffic Sign Recognition (TSR)” (P. 5-24).

Unavailable: Side Radar Obstruction This message appears when the Blind Spot Warning (BSW) or Rear Cross Traffic Alert (RCTA) systems become unavailable because a radar blockage is detected. For additional information, see “Blind Spot Warning (BSW)” (P. 5-32) and “Rear Cross Traffic Alert (RCTA)” (P. 5-43).

Vehicle ahead detection indicator

This indicator appears when the Auto- matic Emergency Braking (AEB) system is engaged and has detected a vehicle. For additional information, see “Automatic Emergency Braking (AEB) with Pedestrian Detection” (P. 5-83).


Download Manual