VEHICLE IDENTIFICATION
VEHICLE IDENTIFICATION NUMBER (VIN) PLATE The VIN plate is attached as shown. This number is the identification for your vehicle and is used in the vehicle registration.
ENGINE SERIAL NUMBER The number is stamped on the engine as shown.
LTI0085 LTI2495
3.8L 6 cylinder (VQ38DD engine model)
F.M.V.S.S./C.M.V.S.S. CERTIFICATION LABEL
The Federal/Canadian Motor Vehicle Safety Standard (F.M.V.S.S./C.M.V.S.S.) certifi- cation label is affixed as shown. This label contains valuable vehicle information, such as: (GVWR), (GAWR), month and year of manufacture, (VIN), etc. Review it carefully.
EMISSION CONTROL INFORMATION LABEL The emission control information label is attached to the underside of the hood as shown.
Type A (if so equipped) Type B (if so equipped)
TIRE AND LOADING INFORMATION LABEL
The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown.
AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is af- fixed to the underside of the hood as shown.
Type A (if so equipped) Type B (if so equipped)
Symbol Name Reference Graphic
Caution ISO 7000 0434
Air Conditioning System (MAC) ISO 2575 D01
MAC System Lubricant Type (PAG–POE)
Requires Registered Technician to Service MAC System
Flammable Refrigerant
Air Conditioner Specification Label Symbols
INSTALLING FRONT LICENSE PLATE
Use the following steps to mount the front license plate: 1. Place the license plate bracket against
the lower plastic finisher. The bracket will align with the pre-molded indents found on the lower plastic finisher. Make holes on the plastic finisher using a 9.5 mm (0.37 in) drill. Apply light pressure to the drill. Install the license plate holder using the four screws provided.
2. Mount the license plate using two M6-14 mm bolts. License plate bolt tightening torque:
5.10 - 6.37 N·m (3.8 - 4.7 ft-lbs.)
Download Manual