Disclaimer: Not affiliated with or endorsed by Nissan Motor Company. For informational purposes only. Full Disclaimer

2022 Nissan Frontier Owners Manual - LIGHTS



LIGHTS

HEADLIGHTS For additional information on headlight bulb replacement, refer to the instructions outlined in this section.

Replacing the halogen headlight bulb (if so equipped) The headlight is a semi-sealed beam type which uses a replaceable headlight (halo- gen) bulb. Because the headlight assembly must be removed from the vehicle for bulb replacement, it is recommended that you visit a NISSAN dealer for this service.

CAUTION

• High pressure halogen gas is sealed  inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped.

• When handling the bulb, do not touch the glass envelope.

DO NOT TOUCH THE BULB WITH BARE HANDS.

Use the same number and wattage as shown in the chart.

Do not leave the bulb out of the head- light reflector for a long period of time as dust, moisture and smoke may enter the headlight body and affect the performance of the headlight.

Aiming is not necessary after replac- ing the bulb. When aiming adjust- ment is necessary, it is recom- mended that you visit a NISSAN dealer for this service.

Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, it is recommended that you visit a NISSAN dealer for servicing.

Replacing the LED headlight bulb (if so equipped) If LED headlight bulb replacement is re- quired, it is recommended that you visit a NISSAN dealer for this service.

FOG LIGHTS (if so equipped) For additional information on fog light bulb replacement, refer to the instructions out- lined in this section.

Replacing the fog light bulb (if so equipped) If fog light bulb replacement is required, it is recommended that you visit a NISSAN dealer for this service.

CAUTION

High pressure halogen gas is sealed

inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped.

When handling the bulb, do not touch the glass envelope.

Use the same number and wattage as originally installed as shown in the chart.

Do not leave the bulb out of the fog light for a long period of time as dust, moisture and smoke may enter the fog light body and affect the perfor- mance of the fog light.

Replacing the LED fog light bulb (if so equipped) If LED fog light bulb replacement is re- quired, it is recommended that you visit a NISSAN dealer for this service.

1. Room light 2. Map light 3. Headlight assembly

4. Fog light/Fog light assembly (if so equipped)

5. Bed light (if so equipped) 6. High-mount stop light/cargo light

7. Rear combination light 8. License plate light

Replacement procedures All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens and/or cover using a cloth and suitable tool.

: Indicates bulb removal : Indicates bulb installation

Use a cloth O1 to protect the housing. Use a cloth O1 to protect the housing.

Map light (Type A) (if so equipped)       Room light (Type A) (if so equipped)


Download Manual