Instrument Cluster - Gauges
Vehicles With: 6.5 Inch Instrument Cluster Display Screen
A Tachometer.B Information bar.C Speedometer.D Fuel gauge.E Information display.F Engine coolant temperature gauge. |
Information Bar
Displays information related to the navigation, outside air temperature, odometer and distance to empty.
Information Display
Displays information related to the navigation, outside air temperature, odometer and distance to empty.
Information Display
Information that appears depends on your vehicle settings. See General Information.
Fuel Gauge
The fuel gauge indicates about how much fuel is in the fuel tank.
The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
Note: The fuel gauge may vary slightly when your vehicle is moving or on a slope.
Low Fuel Reminder
A low fuel level reminder displays and sounds when the distance to empty reaches 75 mi (120 km) to empty for MyKey, and at 50 mi (80 km), 25 mi (40 km), 10 mi (20 km) and mi (0 km) for all vehicle keys.
Note: The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.
Distance to Empty
Indicates the approximate distance your vehicle can travel on the fuel remaining in the tank. Changes in driving pattern can cause the value to not only decrease but also increase or stay constant for periods of time.
Engine Coolant Temperature Gauge
 WARNING: Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury. |
Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as safely possible, switch off the engine and let the engine cool.
Gauges - Vehicles With: 12.3 Inch Instrument Cluster Display Screen
Note: Clusters shown in single gauge view.
Note: Displays may appear slightly different depending on region.
| AGauge display. B Speedometer.C Information bar.D Information display.E Fuel gauge. |
Gauge Display
Displays different gauge selections depending on supported options. Options include Tachometer or Engine Coolant Temperature.
Information Bar
Displays information related to the current audio source, navigation, outside air temperature and distance to empty.
Information Display
Information that appears depends on current gauge view and on-demand settings. See General Information.
Fuel Gauge
The fuel gauge indicates about how much fuel is in the fuel tank.
The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
Note: The fuel gauge may vary slightly when your vehicle is moving or on a slope.
Low Fuel Reminder
A low fuel level reminder displays and sounds when the distance to empty reaches 75 mi (120 km) to empty for MyKey, and at 50 mi (80 km), 25 mi (40 km), 10 mi (20 km) and mi (0 km) for all vehicle keys.
Note: The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.
Distance to Empty
Indicates the approximate distance your vehicle can travel on the fuel remaining in the tank. Changes in driving pattern can cause the value to not only decrease but also increase or stay constant for periods of time.
Engine Coolant Temperature Gauge
| WARNING: Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury. |
Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as safely possible, switch off the engine and let the engine cool.
Gauges - Vehicles With: 4.2 Inch Instrument Cluster Display Screen
| ATachometer. B Information display.C Speedometer.D Fuel gauge.E Engine coolant temperature gauge. |
Information Display
Information that appears depends on your vehicle settings. See General Information.
Fuel Gauge
The fuel gauge indicates about how much fuel is in the fuel tank.
The arrow adjacent to the fuel pump symbol indicates on which side of your vehicle the fuel filler door is located.
Note: The fuel gauge may vary slightly when your vehicle is moving or on a slope.
Low Fuel Reminder
A low fuel level reminder displays and sounds when the distance to empty reaches 75 mi (120 km) to empty for MyKey, and at 50 mi (80 km), 25 mi (40 km), 10 mi (20 km) and mi (0 km) for all vehicle keys.
Note: The low fuel reminder can appear at different fuel gauge positions depending on fuel economy conditions. This variation is normal.
Engine Coolant Temperature Gauge
Indicates engine coolant temperature. At normal operating temperature, the level indicator will be in the normal range. If the engine coolant temperature exceeds the normal range, stop your vehicle as soon as safely possible, switch off the engine and let the engine cool.
| WARNING: Do not remove the coolant reservoir cap when the engine is on or the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury. |
Warning Lamps and Indicators
The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Note: Some warning indicators appear in the information display and function the same as a warning lamp, but do not display when you start your vehicle.
Adaptive Cruise Control (If Equipped)
 The cruise control system indicator light changes color to indicate what mode the system is in. See Using Adaptive Cruise Control .
On (white light): Illuminates when you switch on the adaptive cruise control system. Turns off when you switch the cruise control system off. Engaged (green light): Illuminates when you engage the adaptive cruise control system. Turns off when you disengage the cruise control system. |
Anti-Lock Braking System
 If it illuminates when you are driving, this indicates a system error.You continue to have the normal braking (without ABS) unless the brake system warning lamp also illuminates. Have the system checked. |
Automatic High Beam Control
 Illuminates when this feature is on. See Automatic High Beam Control . |
Auto Hold Active
  Illuminates when the system holds your vehicle stationary. |
Auto Hold Unavailable
  Illuminates when the system is on, but unavailable to hold your vehicle stationary. |
Auto Start-stop (If Equipped)
 Illuminates when the engine shuts down or in conjunction with a message. |
Battery
 If it illuminates while driving, it indicates a system error. Immediately switch off all unnecessary electrical equipment and have the system checked. |
Blind Spot Monitor
 Illuminates when you switch this feature off or in conjunction with a message. See Blind Spot Information System . |
Brake System Warning Lamp
| WARNING: Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance may occur. It may take you longer to stop your vehicle. Have your vehicle checked as soon as possible. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury. |
Note: Indicators vary depending on region.
This lamp is a dual function lamp and illuminates when:
- You apply the parking brake with the ignition on.
- Your vehicle has a brake fault or low brake fluid level, regardless of parking brake position.
  If the lamp illuminates when you are moving, you may have the parking brake applied. Make sure the parking brake is off. Have your vehicle checked as soon as possible if the lamp continues to illuminate. |
Cruise Control (If Equipped)
 Illuminates when you switch this feature on. |
Direction Indicator
 Illuminates when you switch on the left or right direction indicator or the hazard flasher. If the indicators stay on or flash faster, check for a burned out bulb. See Changing a Bulb . |
Door Ajar
 Illuminates when the ignition is on and any door is not completely closed. |
Electric Park Brake
Note: Indicators vary depending on region.
 Illuminates or flashes when the electric parking brake has a system error. See Electric Parking Brake. |
Engine or Motor Coolant Temperature
 Illuminates when your vehicle coolant temperature is high. Stop your vehicle as soon as possible, switch off your vehicle and let it cool. See Engine Coolant Check. |
Engine Oil
Note: Do not resume your journey if it illuminates despite the level being correct. Immediately have the system checked.
Fasten Seatbelt
 Illuminates and a tone sounds to remind you to fasten your seatbelt. See Seatbelt Reminder . |
Fasten Rear Seatbelt
 Illuminates and a tone sounds to signal the rear seatbelts are not fastened. |
Front Airbag
 If it does not illuminate when you switch the ignition on, continues to flash or remains on when the engine is running, this indicates a malfunction. Have your vehicle checked as soon as possible. |
Front Fog Lamps (If Equipped)
 Illuminates when you switch the front fog lamps on. |
High Beam
 Illuminates when you switch the high beam headlamps on. It flashes when you use the headlamp flasher. |
High Voltage Electric System Failure (If Equipped)
 It illuminates if your hybrid electric vehicle has an electrical component fault or failure that causes your vehicle to shutdown or enter a limited operating mode. A message may appear in the instrument cluster display. |
Hill Descent (If Equipped)
 Illuminates when you switch hill descent on. |
Hood Ajar
 Illuminates when the ignition is on and the hood is not completely closed. |
Lamps On
 Illuminates when you switch the low beam headlamps or the parking lamps on. |
Liftgate Ajar
 Illuminates when the liftgate is not completely closed. |
Low Beam Warning
 Illuminates when the low beam headlamp bulb is not properly functioning. |
Low Fuel Level
 Illuminates when the fuel level is low or the fuel tank is nearly empty. Refuel as soon as possible. |
Low Tire Pressure Warning
 Illuminates when the tire pressure is low. If the lamp remains on with the engine running or when driving, check the tire pressure as soon as possible.
It also momentarily illuminates when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked. |
Low Washer Fluid
 Illuminates when the windshield washer fluid is low. |
Powertrain Fault
 Illuminates when the system detects a powertrain or a 4WD/AWD fault. Contact an authorized dealer as soon as possible. |
Ready to Drive (If Equipped)
 Illuminates when you have switched on your hybrid electric vehicle and it is ready to drive. A corresponding message may appear stating ready to drive. |
Service Engine Soon
 It illuminates when you switch the ignition on prior to engine start to check the bulb and to indicate whether your vehicle is ready for Inspection and Maintenance testing.
Normally, it illuminates until the engine is cranked and automatically turns off if no system errors are present. However, if after 15 seconds it flashes eight times, this indicates that your vehicle is not ready for Inspection and Maintenance testing. See Catalytic Converter. If it illuminates when the engine is running this indicates a system error. The On Board Diagnostics system has detected an error in the vehicle emission control system. If it flashes, engine misfire may be occurring. Continuing to drive your vehicle may cause reduced power or the engine to stop.Failure to respond to the warning lamp may cause component damage not covered by the vehicle Warranty. Have your vehicle checked as soon as possible. |
Stability Control
 It flashes when the system is active. If it remains illuminated or does not illuminate when you switch the ignition on, this indicates a system error. During a system error the system switches off. Immediately have the system checked. See Using Stability Control . |
Stability Control Off
 Illuminates when you switch the system off. It goes out when you switch the system back on or when you switch the ignition off. |
Audible Warnings and Indicators
Key in Ignition Warning Chime (If Equipped)
Sounds when you open the driver's door and you have left the key in the ignition.
Keyless Warning Alert (If Equipped)
Sounds the horn twice when you exit your vehicle with the intelligent access key, after the last door is closed and your keyless vehicle is in RUN, indicating your vehicle is still on.
Headlamps On Warning Chime
Sounds when you remove the key from the ignition and open the driver's door and you have left the headlamps or parking lamps on.
Parking Brake On Warning Chime
Sounds when you have left the parking brake on and drive your vehicle. If the warning chime remains on after you have released the parking brake, have the system checked by an authorized dealer immediately.
Download Manual