Driver Adjustable Pedals — If Equipped
The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. This feature allows the brake and accelerator pedals to move toward or away from the driver to provide improved position with the steering wheel.
The switch is located on the outboard side of the driver's seat.
Adjustable Pedals Switch
Push the switch forward to move the pedals forward (toward the front of the vehicle).
Push the switch rearward to move the pedals rearward (toward the driver).
The pedals cannot be adjusted when the vehicle is in REVERSE or when the Cruise Control system or Adaptive Cruise Control system is on. If there is an attempt to adjust the pedals when the system is locked out, one of the following messages will appear (on vehicles equipped with an instrument cluster):
-
Adjustable Pedal Disabled — Cruise Control Engaged
-
Adjustable Pedal Disabled — Vehicle In Reverse
Note:
-
The pedals can be adjusted with the ignition in the OFF position.
-
Always adjust the pedals to a position that allows full movement of the pedal.
-
Further small adjustments may be necessary to find the best possible seat/pedal position.
-
For vehicles equipped with Driver Memory Settings "⇨DRIVER MEMORY SETTINGS — IF EQUIPPED", you can use your key fob or the memory switch on the driver’s door trim panel to return the adjustable pedals to saved positions.
WARNING:
Do not adjust the pedals while the vehicle is moving. You could lose control and have an accident. Always adjust the pedals while the vehicle is parked.
CAUTION:
Do not place any article under the adjustable pedals or impede its ability to move, as it may cause damage to the pedal controls. Pedal travel may become limited if movement is stopped by an obstruction in the adjustable pedal's path.
Download Manual