Checking And Adding Engine Oil To Your Chrysler 300 - Ensuring Your Engine Stays Properly Lubricated

By Nick Marchenko, PhD

Hi, automotive enthusiasts! Today, we're embarking on a quintessential journey beneath the bonnet of a 2015 Chrysler 300 with a robust 3.6L V6 engine. This guide is your first-class ticket to mastering the art of checking and topping up your engine oil, a crucial task for maintaining the gallant performance and longevity of your vehicle.

Understanding Your Engine's Geography

Firstly, let's acquaint ourselves with the layout of our mechanical steed. The V6 engine in question is mounted rear-wheel drive, running parallel to the vehicle. This orientation places our components of interest, the dipstick and oil fill port, in locations slightly different from their positions in transverse engine setups.

Step 1: The Art of Checking Oil Levels

Begin this procedure with your vehicle on a flat surface to ensure accuracy, and with the engine cool. Pull the dipstick from its residence to wipe it clean. Reinsert it fully, then withdraw it once more to inspect the oil level. You're aiming for the oil to mark between two dots or holes on the dipstick, indicating the optimal range. If the oil hits the top dot, you're in the clear with perfect oil levels. Not too dirty, not too low - just right.

For those curious about the specifics, reference our insightful post on locating your Chrysler 300's VIN for additional maintenance tips.

Step 2: The Ceremony of Adding Oil

If your dipstick reading suggests your steed thirsts for more lubricant, proceed to the oil fill cap located on the left side of the engine bay. Unscrew this cap counterclockwise (a 90° turn will do) and introduce the recommended 5W-20 oil, using a funnel to avoid any spillage. After your generous offering, secure the cap back on, ensuring it's tight and the letters face you - a neat trick for the aesthetically inclined.

Shop From Amazon

ONER Engine Oil Cooler and Oil Filter Housing Adapter Assembly,Fit for 2014-2017 Chrysler...

Dorman 69010 Oil Drain Plug Pilot Point M14-1.50, Head Size 16Mm Compatible with Select Mo...

Should your oil levels be at the lower dot, a quart of oil typically suffices to reach the upper echelon. However, this amount can vary slightly, so proceed with a careful hand and a keen eye.

Where to Next?

Now that you've mastered the oil check and top-up, why not expand your DIY repertoire? Dive into our guides on replacing the trunk actuator, windshield wiper replacement, and engine swap compatibility for your Chrysler 300. Each guide is packed with step-by-step instructions and tips to enhance your vehicle's performance and appearance.

Shop From Amazon

FRAM Extra Guard CH11665, 10K Mile Change Interval Full Flow Lube Oil Cartridge

Purolator - PL36296 ONE Advanced Engine Protection Cartridge Oil Filter

Remember, the key to a healthy vehicle lies in regular maintenance and a touch of DIY spirit. Thank you for joining us on this oily adventure. Your Chrysler 300, with its engine now purring contentedly, thanks you too. Keep turning those wrenches, and until next time, happy motoring!

P.S. Don't forget to check out our guide on adding glamour to your Chrysler 300 with ceramic coating for that extra shine!

Nick Marchenko, PhD

Industrial Engineer & Automotive Content Specialist

Nick writes in-depth guides on car clubs, engine specs, vehicle ownership, and modifications, combining engineering knowledge with automotive passion.

Full profile → LinkedIn →