Additional settings
System settings
Introduction
General settings are described in this chapter. You can find specific settings in the chapters about those settings. The available settings depend on the vehicle equipment.
Date and time
» Applies to: MMI: Select on the home screen: SETTINGS > General > Date & time.
Possible settings: ~ Automatically set date and time Date -Time ~ Date format ~Time format — Automatic time zone -Time zone
Measurement u
» Applies to: MMI: Select on the home screen: SETTINGS > General > Measurement units.
Possible settings: -Speed — Distance - Temperature -Volume Pressure — Consumption (engine)
Language and keyboard > Applies to MMI: Select on the home screen: SETTINGS > Language & keyboard.
Language You can change the languages for the display, navigation announcements, and the voice recognition system.
Keyboard See page 23.
Requirement: an audio source must be active. > Applies to MMI: Select on the home screen: SETTINGS > Sound.
Possible settings: —Treble —Bass ~Balance/fader ~ Speed dependent volume control ~ Subwoofer ~ Surround Level — Focus — 3D effect
Announcements and tones
» Applies to: MMI: Select on the home screen: SETTINGS > Announcements & Tones.
Possible settings: — Announcement volume — Audi Heartbeat
Adjust the volume of the audio system so that signals from outside the vehicle, such as police and fire sirens, can be heard easily at all times. The volume is automatically adjusted to a preset level when the MMI is switched on.
» Applies to MMI: Select on the home screen: SETTINGS > Connection settings > Bluetooth >
Additional settings
Bluetooth
You can select a setting for visibility of the MMI to other Bluetooth devices. To connect a new Bluetooth device, the Visible setting must be selected. If Invisible is selected, a Bluetooth connection will only be possible with paired devices. If Offis selected, no Bluetooth device can be connected.
Bluetooth audio player When this function is switched on, the profile will load automatically when your Bluetooth audio player is within range. Bluetooth name The MMI’s Bluetooth name is displayed and can be changed.
The name of the Wi-Fi hotspot and the Bluetooth name are automatically compared when there are changes.
Factory default settings Requirement: the ignition must be switched on.
» Applies to MMI: Select on the home screen: SETTINGS > System maintenance > Restore factory settings.
» Follow the system instructions. The settings will be reset. The system will restart. This may take some time.
Make sure that not only the settings were deleted but also the stored data, if applicable.
Software update seals
cles with software update
You can update your vehicle's software. The functions depend on the country and vehicle equipment: ~Map material update for the navigation system. page 184.
~ Have the software update performed by an authorized Audi dealer or autho ized Audi Service Facility. This can result in additional costs.
~ Perform the installation only when the vehicle is stationary. Otherwise, this increases the risk of an accident
~ If the installation fails, contact an authorized Audi dealer or authorized Audi Service Facility immediately to have the malfunction corrected.
Connected devices Displayed connected devices Requirement: the vehicle must be stationary and the ignition must be switched on. > Applies to: MMI: Select on the home screen: SETTINGS > Connected devices.
Possible menu items:
~Telephone 1 ~Telephone 2 ~ Audio player — Wi-Fi hotspot — Headset
Smartphone interface You can connect your smartphone to the MMI page 204. myAudi app This function is available if an appropriate Audi app is installed on your mobile device and started, and if the mobile device is connected to the vehicle’s Wi-Fi hotspot.
Read the information about Audi connect, and be sure to note the connectivity costs section page 168.
Managing connected devices Requirement: the connected devices menu must be displayed > page 208. >
Additional settings
Connecting a device Requirement: Bluetooth visibility must be activated in the MMI page 208 and mobile device.
» Press on a menu item, such as Telephone 1.
» To search for and connect your mobile device,
press New connection = page 157. Selecting a connected device
» Press on a menu item, such as Telephone 1.
» Press on the desired mobile device in the list of displayed devices. The connection will be made.
Disconnecting a connected device
» Press on a menu item, such as Telephone 1.
» Press on the connected mobile device. The selected mobile device will be disconnected from the MMI.
Deleting a device
» Press on a menu item, such as Telephone 1.
» Press and hold an element until the Options menu is displayed.
> Press Delete. If a device is listed multiple times, it will be deleted from all menu items.
Ad
ional options Depending on the selected function, additional options may be available. Requirement: the connected devices menu must be displayed page 208. > Press on a menu item, such as Telephone 1.
» Press and hold an element until the Options menu is displayed.
Bluetooth profiles You can switch desired profiles on or off separately in the MMI.
Favorite
To set a paired mobile device as the default phone, activate this function in the MMI. When the mobile device is in range and the Bluetooth function on the mobile device and in the MM is switched on, the default phone will be given priority over the other Bluetooth devices and will be connected directly to the MMI.
Legal information General information
Information on the software licenses can be found online at www.audi.com/softwareinfo.
Multi Media Interface
> Applies to: MMI: Select on the home screen: SETTINGS > General.
Subscriptions Version information
Legal notes Possible options: — Software information — About Audi connect
Smartphone interface Applies to: vehicles with smartphone interface Requirement: a smartphone must be connected to the MMI page 204.
» Applies to: MMI: Select on the home screen: SETTINGS > Connected devices > Smartphone interface.
» Press and hold an element until the Options menuis displayed.
» Press Legal notes.
Instrument cluster
Requirement: the vehicle must be stationary and the ignition must be switched on.
» Select in the instrument cluster: vehicle functions tab > page 12.
» Press and hold the [=] button on the multifunction steering wheel until the display appears. Possible options: ~ Engine code ~ Software information —Version information
Additional settings
Head-up display (es with head-up display
Requirement: the vehicle must be stationary and the ignition must be switched on. The head-up display is switched on. > Applies to: MMI: Select on the home screen: SETTINGS > Display & brightness > Head-up display > Display contents > Show the license text in the head-up display.
Download Manual